DIY Notebook Cover Pattern with Card Slots and Hand-Sewn Stick Sign

DIY Notebook Cover Pattern with Card Slots and Hand-Sewn Stick Sign

Leather Note Book, Journey Diary

ntroduction:
Notebooks are essential tools for keeping our thoughts, ideas, and plans organized. Adding a personalized touch to your notebook by creating a custom cover can make it even more special. In this blog post, we will guide you through a step-by-step process to create a stylish notebook cover with two small card slots and a hand-sewn stick sign. Let's get started!

Materials Needed:

Fabric of your choice
Scissors
Measuring tape or ruler
Sewing needle
Thread
Pins
Cardboard or cardstock
Pencil or fabric marker
Step 1: Measuring and Cutting

Measure your notebook by placing it open on the fabric. Leave a 1-inch allowance on all sides for seam allowance.
Mark the measurements with a pencil or fabric marker.
Cut out the fabric along the marked lines, creating a rectangular piece.
Step 2: Creating Card Slots

Determine the desired size of the card slots based on the size of your cards.
Cut two rectangular pieces of fabric slightly larger than the card size.
Fold and press one short side of each fabric piece by ¼ inch, then fold and press again by ½ inch to create a clean edge.
Place the folded edges of the fabric pieces on the main fabric piece, aligning them parallel to each other.
Pin the fabric pieces in place and sew along the sides and bottom edges to secure them. You can use a sewing machine or hand-sew them.
Step 3: Adding Stick Sign for Hand Sewing

Cut a small rectangular piece of cardboard or cardstock.
Draw or trace a stick sign or any other design of your choice onto the cardboard piece.
Cut out the stick sign along the drawn lines.
Place the stick sign on the front cover of the fabric, positioning it where you want it to be.
Trace the stick sign onto the fabric using a pencil or fabric marker.
Step 4: Hand Sewing the Stick Sign

Thread a needle with a thread color that complements the fabric.
Start sewing from the back of the fabric, bringing the needle through the first point on the traced stick sign.
Sew along the traced lines, using a running stitch or any other decorative stitch of your choice.
Once you finish sewing the stick sign, secure the thread at the back of the fabric and cut any excess thread.
Step 5: Assembling the Notebook Cover

Fold the fabric in half lengthwise, with the right sides facing inward.
Pin the sides of the fabric together, leaving the top open.
Sew along the pinned edges, leaving a ½ inch seam allowance. You can use a sewing machine or hand-sew it.
Trim any excess fabric and clip the corners to reduce bulk.
Turn the cover right side out and press it flat with an iron.
Conclusion:
Creating a personalized notebook cover with card slots and a hand-sewn stick sign adds a unique touch to your journaling or note-taking experience. With this step-by-step guide, you can easily make a stylish and functional notebook cover that reflects your creativity. Enjoy the process of sewing and personalizing your notebook cover, and let your creativity shine through!

Remember to experiment with different fabrics, colors, and designs to make your notebook cover truly one-of-a-kind. Happy crafting!

 

 

 

 

 

Back to blog

Leave a comment

Please note, comments need to be approved before they are published.